How to Mix Fist Lube Powder for Anal Play

Quick answer

Mix Fist Lube Powder with water to create a custom-thick, slick lubricant ideal for anal play. The key is controlling the ratio to match your activity and avoiding common clumping mistakes.

Step-by-step mixing guide

1. 1. Prepare your container and water: Use a clean, dry bowl or bottle. Start with room-temperature water—about 250 ml (1 cup) for a small batch. Hot water can break down the lubricant's consistency. Do not use hot water; it can ruin the lube's texture.
2. 2. Add the powder gradually: Sprinkle a small amount of Fist Lube Powder (about 1 teaspoon) onto the water surface while stirring continuously. Avoid dumping the powder all at once to prevent clumps. Add powder slowly while stirring to avoid lumps.
3. 3. Stir until fully dissolved: Keep stirring for 1–2 minutes until the powder is completely dissolved and the mixture becomes clear and slightly thick. If you see undissolved granules, continue stirring or let it sit for a few minutes and stir again. Check for granules; undissolved powder can cause irritation.
4. 4. Adjust thickness to preference: For a thinner lube, add more water in small increments. For a thicker, more gel-like consistency, add a tiny bit more powder and stir well. Test the slip on your fingers before use. Start thin and thicken gradually—it's easier than thinning a too-thick batch.
5. 5. Let it rest and store properly: Let the mixed lube sit for 5–10 minutes to fully hydrate. Transfer to a squeeze bottle or jar with a lid. Store in a cool, dark place and use within a few weeks. Discard if the color or smell changes. Always label your container with the mixing date.

Product facts

• Fist Lube Powder 100g, Fisting Lube Mix: One tub of Fist lube powder makes approximately 10 litres of lube when mixed as directed. This means a single tub can last through many sessions, making it a cost-effective choice for regular anal play.