What Is the Triphase Cable Set?
The Triphase Cable Set opens a new dimension in electroplay by converting the dual-channel isolated output from a compatible control unit into three points of non-isolated contact. This setup combines the sensations of both channels to produce an almost '3D' experience, adding depth and variety to your sessions.
Designed specifically for use with the 2B and the original Series 2 unit, the cable set includes adaptors that allow connection to both 2mm and 4mm socketed electrodes. This flexibility means you can pair it with a wide range of existing electrodes without needing additional adapters.
What the Catalog Confirms
- Triphase Cable Set: TriPhase adds a whole new dimension to your electroplay experience. This confirms the cable set is intended to enhance sensation, not just serve as a passive connector.

Triphase Cable Set - Triphase Cable Set: Designed for use with our 2B, and our original Series 2 unit. Compatibility is limited to these two control units; other units may not work or could be unsafe.
- Triphase Cable Set: The cable set converts the dual channel isolated output from the 2B control unit into 3 points of non isolated contact. This explains the core function: merging two channels into three contact points for a blended sensation.
- Triphase Cable Set: Supplied with adaptors to allow connection to both 2mm and 4mm socketed electrodes. The included adaptors ensure compatibility with common electrode sizes, saving you from buying extra parts.
How to Set Up the Triphase Cable Set
Setting up the Triphase Cable Set is straightforward, but careful attention to connections ensures safe and effective play.
- 1. Verify Your Control Unit: Ensure you have a 2B or original Series 2 unit. The cable set is designed exclusively for these models; using it with other units is not supported by the manufacturer.
- 2. Connect the Cable to the Control Unit: Plug the cable set into the dual-channel output of your control unit. The cable will combine both channels into a single cable that branches into three contact points.
- 3. Attach the Appropriate Adaptors: Select the adaptor that matches your electrode sockets: 2mm or 4mm. The set includes both types, so you can switch depending on your electrode collection.
- 4. Connect the Electrodes: Attach your chosen electrodes to the three contact points. Because the contacts are non-isolated, the sensations from both channels will blend, creating the described '3D' effect.
- 5. Test Before Full Play: Start with a low intensity setting to confirm all connections are secure and the sensation feels as expected. Adjust as needed.
Play Ideas with Triphase Wiring
With three contact points, you can create varied sensation patterns. For example, place one electrode on a sensitive area and the other two on less sensitive spots to experience a shifting focus of stimulation. Alternatively, use the three points to create a circuit that travels across the body, enhancing the feeling of being 'wired' into the unit.
Because the cable set blends both channels, you can also experiment with different electrode types on each contact point—such as a conductive loop on one and a pad on another—to mix sensations. The included 2mm and 4mm adaptors make it easy to swap between electrode types without interruption.
What the Catalog Does Not Confirm
The supplied information does not include specific safety warnings, cleaning instructions, or maximum voltage ratings for the Triphase Cable Set. For safe operation, always follow the guidelines provided with your control unit and electrodes. If you have questions about compatibility with specific electrodes or body parts, consult the manufacturer's documentation or contact customer support.


